Digi IX30 User Manual

Monitoring intelliFlow
IX30 User Guide
888
intelliFlow
Digi intelliFlow is a reporting and graphical presentation tool for visualizing your network’s data usage
and network traffic information.
intelliFlow can be enabled on Digi Remote Manager to provide a full analysis of all Digi devices on
your network. Contact your Digi sales representative for information about enabling intelliFlow on
Remote Manager.
IntelliFlow is also available on the local device for device-specific visualization of network use. To use
intelliFlow on the local device, you must have access to the local WebUI. Once you enable intelliFlow,
the Status > intelliFlow option is available in the main menu. By default, intelliFlow is disabled on
the local device.
On the local device, intelliFlow provides charts on the following information:
n
System utilisation
n
Top data usage by host
n
Top data usage by server
n
Top data usage by service
n
Host data usage over time
intelliFlow charts are dymanic; at any point, you can click inside the chart to drill down to view more
granular information, and menu options allow you to change various aspects of the information being
displayed.
This section contains the following topics:
Enable intelliFlow 889
Configure service types 891
Configure domain name groups 893
Use intelliFlow to display average CPU and RAMusage 896
Use intelliFlow to display top data usage information 897
Use intelliFlow to display data usage by host over time 899

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM