Digi IX30

Services Location information
IX30 User Guide
531
Location information
Your IX30 device can be configured to use the following location sources:
n
User-defined static location.
n
Location messages forwarded to the device from other location-enabled devices.
You can also configure your IX30 device to forward location messages, either from the IX30 device or
from external sources, to a remote host. Additionally, the device can be configured to use a geofence,
to allow you to determine actions that will be taken based on the physical location of the device.
This section contains the following topics:
Configure the location service 532
Configure the device to use a user-defined static location 534
Configure the device to accept location messages from external sources 536
Forward location information to a remote host 541
Configure geofencing 547
Show location information 560