System administration Configure a power profile
IX30 User Guide
865
3. To deactivate the Find Me feature, type the following at the command prompt:
> system find-me off
>
4. To determine the status of the Find Me feature, type the following at the command prompt:
> system find-me status
off
>
Configure a power profile
A power profile is a group of settings that determine how the system will behave in terms of power
consumption during standard operating mode. You can choose to preserve power, performance or to
balance both. You can also disable the IX30's LEDs to save power and reduce light pollution.
To change the active power profile:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General
