Interfaces Wide Area Networks (WANs)
IX30 User Guide
108
Configure cellular modem APNs
The IX30 device uses a preconfigured list of Access Point Names (APNs) when attempting to connect
to a cellular carrier for the first time. After the device has successfully connected, it will remember the
correct APN. As a result, it is generally not necessary to configure APNs. However, you can configure
the system to use a specified APN.
To configure the APN:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General
