Interfaces Local Area Networks (LANs)
IX30 User Guide
182
Configure DHCP options
You can configure DHCP servers running on your IX30 device to send certain specified DHCP options to
DHCP clients. You can also set the user class, which enables you to specify which specific DHCP clients
will receive the option. You can also force the command to be sent to the clients.
DHCP options can be set on a per-LAN basis, or can be set for all LANs. A total of 32 DHCP options can
be configured.
Required configuration items
n
DHCPoption number.
n
Value for the DHCP option.
Additional configuration items
n
The data type of the value.
n
Force the option to be sent to the DHCPclients.
n
A label for the custom option.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
To Next Page
Loading...
Need help?
General
