Digi IX30

Interfaces Local Area Networks (LANs)
IX30 User Guide
189
connected to a LAN interface.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the interface or select an existing interface:
n
To create a new interface, for Add interface, type a name for the interface and click .
n
To edit an existing interface, click to expand the interface.
The Interface configuration window is displayed.