EasyManuals Logo

Digi IX30 User Manual

Digi IX30
1031 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #310 background imageLoading...
Page #310 background image
Routing Dynamic DNS
IX30 User Guide
310
6. If custom is configured for service, set the custom URL that should be used to update the IP
address with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> custom url
(config network ddns new_ddns_instance)>
7. Set the domain name that is linked to the interface's IP address:
(config network ddns new_ddns_instance)> domain domain_name
(config network ddns new_ddns_instance)>
8. Set the username to authenticate with the Dynamic DNSprovider:
(config network ddns new_ddns_instance)> username name
(config network ddns new_ddns_instance)>
9. Set the password to authenticate with the Dynamic DNSprovider:
(config network ddns new_ddns_instance)> password pwd
(config network ddns new_ddns_instance)>
10. (Optional) Set the amount of time to wait to check if the interface's IP address needs to be
updated:
(config network ddns new_ddns_instance)> check_interval value
(config network ddns new_ddns_instance)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set check_interval to ten minutes, enter either 10m or 600s:
(config network ddns new_ddns_instance)> check_interval 600s
(config network ddns new_ddns_instance)>
The default is 10m.
11. (Optional) Set the amount of time to wait to force an update of the interface's IP address:
(config network ddns new_ddns_instance)> force_interval value
(config network ddns new_ddns_instance)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set force_interval to ten minutes, enter either 10m or 600s:
(config network ddns new_ddns_instance)> force_interval 600s
(config network ddns new_ddns_instance)>
The default is 3d.
12. (Optional) Set the amount of time to wait for an IP address update to succeed before retrying
the update:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi IX30 and is the answer not in the manual?

Digi IX30 Specifications

General IconGeneral
CategoryNetwork Router
ModelIX30
Serial Ports1 x RS-232
Operating Temperature-40° C to 70° C
ConnectivityEthernet
USB Ports1 x USB 2.0
Cellular Interface4G LTE Cat 4
Wi-Fi802.11 a/b/g/n/ac
SIM Slots1
ProcessorARM Cortex-A9
Memory1 GB RAM

Related product manuals