Digi IX30

Virtual Private Networks (VPN) IPsec
IX30 User Guide
341
n
Tunnel and key renegotiating
l
The lifetime of the IPsec tunnel before it is renegotiated.
l
The amount of time before the IKE phase 1 lifetime expires.
l
The amount of time before the IKEphase 2 lifetime expires
l
The lifetime margin, a randomizing amount of time before the IPsec tunnel is renegotiated.
Note if the remote networks for an IPsec tunnel overlap with the networks for a WAN internet
connection (wired, cellular, or otherwise), you must configure a static route to direct the traffic either
through the IPsec tunnel, or through the WAN (outside of the IPsec tunnel). See Configure a static
route for information about configuring a static route.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Click to expand Tunnels.