Digi IX30

Virtual Private Networks (VPN) IPsec
IX30 User Guide
365
Additional Configuration
---------------------------------------------------------------------
----------
connection_retry_timeout Connection retry timeout
connection_try_interval Connection try interval
ike_timeout IKE timeout
(config)>
Generally, the default settings for these should be sufficient.
c. You can also enable debugging for IPsec:
(config)> vpn ipsec advanced debug value
(config)>
where value is one of:
n
none
n
basic_auditing
n
detailed_control
n
generic_control
n
raw_data
n
sensitive_data
20. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
21. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.