Virtual Private Networks (VPN) IPsec
IX30 User Guide
382
18. Click to expand Distinguished Name.
19. Type the value for each appropriate Distinguished Name attribute.
20. (Optional) Configure the certificate revocation list (CRL):
a. Click to expand CRL.
b. Click Enable to enable the CRL.
c. For Type, select the type of CRL:
n
URL: The URL to the file name used to access the certificate revocation list from the
CA.
n
CRLDP: The CRL distribution point.
n
getCRL: A CRL query using the issuer name and serial number from the certificate
whose revocation status is being queried.
The default is URL.
d. If Type is set to URL, for URL, type the URL to be used.
21. Configure certificate renewal:
a. Click to expand Renewal.
b. Click Use New Private Key to enable the creation of a new private key for renewal
requests.
c. Use Client Certificate is enabled by default. Click to disable the use of a client certificate
for renewal requrests.
22. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
To Next Page
Loading...
Need help?
General
