Digi IX30 User Manual

Virtual Private Networks (VPN) IPsec
IX30 User Guide
388
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,
prior to the request expiring. This value must match the setting of the Allow renewal x days
before the certified is expired option on the Fortinet server.
7. (Optional) Click Debug to enable verbose logging in /var/log/scep_client.
8. Click to expand SCEP server.
9. For FQDN, type the fully qualified domain name or IP address of the Fortinet server.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM