Virtual Private Networks (VPN) L2TP
IX30 User Guide
458
n
The number of probe attempts before the PPP-over-L2TP connection is considered to have
failed.
n
The amount of time that the device should wait for a response to a probe attempt before
considering it to have failed.
To configure the IX30 device to regularly probe the PPP-over-L2TP connection:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > PPP-over-L2TP.
4. Create a new PPP-over-L2TP access concatenator or select an existing one:
n
To create a new L2TP access concatenator , see Configure a PPP-over-L2TP tunnel.
n
To edit an existing L2TP access concatenator , click to expand the appropriate tunnel.
To Next Page
Loading...
Need help?
General
