Services Configure DNS
IX30 User Guide
513
n
Whether to prevent upstream DNS servers from returning private IP addresses.
n
Additional DNS servers, in addition to the ones associated with the device's network interfaces.
n
Specific host names and their IP addresses.
The device is configured by default with the hostname digi.device, which corresponds to the
192.168.210.1 IP address.
To configure the DNS server:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > DNS.
4. Click Access control list to configure access control:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses.
b. For Add Address, click .
To Next Page
Loading...
Need help?
General
