Digi IX30 User Manual

Central management Configure your device for Digi Remote Manager support
IX30 User Guide
58
(config)> cloud drm reboot_timeout 600s
(config)>
The minimum value is 30 minutes and the maximum is 48 hours. If not set, this option is
disabled. The default is disabled.
12. firmware_url should normally be left at the default location. To change:
(config)> cloud drm firmware_url url
(config)>
13. (Optional) Set the hostname or IP address of the speedtest server. The default is
speedtest.accns.com.
(config)> cloud drm speedtest_server name
(config)>
14. (Optional) Determine whether to require a login and password to authenticate the user from
the remote cloud services CLI:
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
15. (Optional) Configure the IX30 device to communicate with remote cloud servicesby using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination drm_phone_number
(config)>
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
16. (Optional) Configure the IX30 device to communicate with remote cloud servicesby using an
HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
b. Set the hostname of the proxy server:
(config)> cloud drm proxy host hostname
(config)>

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM