Digi IX30 User Manual

Applications Use Python to control the color of multi-colored LEDs
IX30 User Guide
669
import os
from digidevice import cli
POLL_TIME = 60
def cmd_reboot(params):
print("Rebooting unit...")
try:
cli.execute("reboot", 10)
except:
print("Failed to run 'reboot' command")
return HTTPStatus.INTERNAL_SERVER_ERROR
return HTTPStatus.OK
def cmd_fwupdate(params):
try:
fw_uri = params["uri"]
except:
print("Firmware file URI not passed")
return HTTPStatus.BAD_REQUEST
print("Request to update firmware with URI: {}".format(fw_uri))
try:
fd, fname = tempfile.mkstemp()
os.close(fd)
try:
urllib.request.urlretrieve(fw_uri, fname)
except:
print("Failed to download FW file from URI {}".format(fw_uri))
return HTTPStatus.NOT_FOUND
try:
ret = cli.execute("system firmware update file " + fname, 60)
except:
print("Failed to run firmware update command")
return HTTPStatus.INTERNAL_SERVER_ERROR
if not "Firmware update completed" in ret:
print("Failed to update firmware")
return HTTPStatus.INTERNAL_SERVER_ERROR
finally:
os.remove(fname)
print("Firmware update finished")
return HTTPStatus.OK
CMD_HANDLERS = {
"reboot": cmd_reboot,
"fw-update": cmd_fwupdate
}
def send_cmd_reply(client, cmd_path, cid, cmd, status):
if not status or not cid:
return
if cmd_path.startswith(PREFIX_CMD):

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM