User authentication Local users
IX30 User Guide
714
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
The user is enabled by default. To disable, toggle off Enable.
5. (Optional) For Username alias, type an alias for the user.
To Next Page
Loading...
