Digi IX30 User Manual

User authentication Local users
IX30 User Guide
718
(config auth user new_user)> lockout duration 600s
(config auth user new_user)>
The minimum value is 1 second, and the maximum is 15 minutes. The default is 15
minutes.
7. Add groups for the user.
Groups define user access rights. See Authentication groups for information about configuring
groups.
a. Add a group to the user. For example, to add the admin group to the user:
(config auth user new_user> add group end admin
(config auth user new_user)>
Note Every user must be configured with at least one group.
b. (Optional) Add additional groups by repeating the add group command:
(config auth user new_user> add group end serial
(config auth user new_user)>
To remove a group from a user:
a. Use the show command to determine the index number of the group to be deleted:
(config auth user new_user> show group
0 admin
1 serial
(config auth user new_user>
b. Type the following:
(config auth user new_user)> del group n
(config auth user new_user)>
Where n is index number of the authentication method to be deleted. For example, to
delete the serial group as displayed by the example show command, above:
(config auth user new_user)> del group 1
(config auth user new_user)>
8. (Optional) Add SSH keys for the user to use passwordless SSH login:
a. Change to the user's ssh_key node:
(config auth user new_user)> ssh_key
(config auth user new_user ssh_key)>
b. Add the key by using the ssh_key command and pasting or typing a public encryption key
that this user can use for passwordless SSH login:
(config auth user new_user ssh_key)> ssh_key key
(config auth user new_user ssh_key)>

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM