Containers Configure a container
IX30 User Guide
811
l
The bridge to be used to provide network connectivity.
l
A static IP address for the container.
l
The network gateway.
n
Serial ports on the device that the container will have access to.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in Use Digi Remote Manager to view and manage your
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Containers.
4. For Add Container, type the name of the container and click .
The Container configuration window is displayed.
New containers are enabled by default. To disable, toggle off Enable.
To Next Page
Loading...
Need help?
General
