Digi IX30 User Manual

Containers Create a custom container
IX30 User Guide
821
v. Create Configuration is selected by default. This will create a configuration on the
device for the container when it is installed. If deselected, you will need to create the
configuration manually.
vi. Click Apply.
2. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the IX30 local command line as a user
with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
3. At the shell prompt, type:
# lxc python_lxc
lxc #
4. Execute the python command:
lxc # python /etc/test.py
Hello world.
lxc #

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM