Digi IX30 User Manual

Command line interface Execute configuration commands at the root Admin CLI prompt
IX30 User Guide
987
1. For example:
> config ?
Will display the following help information:
> config ?
Additional Configuration
-------------------------------------------------------------------------
-
application Custom scripts
auth Authentication
cloud Central management
firewall Firewall
monitoring Monitoring
network Network
serial Serial
service Services
system System
vpn VPN
Run "config" with no arguments to enter the configuration editing mode.
> config
2. You can then display help for the additional configuration commands. For example, to display
help for the config service command:
> config service ?
Services
Additional Configuration
-------------------------------------------------------------------------
-
dns DNS
mdns Service Discovery (mDNS)
multicast Multicast
ntp NTP
remote_control Remote control
snmp SNMP
ssh SSH
telnet Telnet
web_admin Web administration
> config service
3. Next, display help for the config service ssh command:
> config service ssh ?
SSH: An SSH server for managing the device.

Digi IX30 Specifications

General

Category	Network Router
Model	IX30
Serial Ports	1 x RS-232
Operating Temperature	-40° C to 70° C
Connectivity	Ethernet
USB Ports	1 x USB 2.0
Cellular Interface	4G LTE Cat 4
Wi-Fi	802.11 a/b/g/n/ac
SIM Slots	1
Processor	ARM Cortex-A9
Memory	1 GB RAM