Appendix H HYBRID Coater Service Manual ver1.1
166
Some I/O is dedicated for the machine. Other are present for present and future options.
Some of this last I/O is flexible, which means that it can be used as an input which function is
determined by the software running on the Personal Computer.
CONNECTORS P1, P2 AND P3 TO CONNECTION PCB
These connectors are present to connect signals to the EL-04875 Connection PCB.
See wiring diagrams MHC-0200-0108 for more information.
CONNECTORS P15 AND P17 TO CONNECTION PCB
These connectors are not used at this moment.
CONNECTOR P4 FOR THE CAMERA
This connector is used for connecting the video signal of the camera to the EL-04875
Connection PCB.
See wiring diagrams MHC-0200-0108 for more information.
CONNECTORS P5 AND P6 FOR DISPENSE MOTORS OR ROTARY VALVES
These connectors are present for above mentioned option.
CONNECTOR P7 FOR EL-04870 ILLUMINATION PCB
This Advanced Fiducial Camera Illumination PCB contains LED’s which illuminate the
product.
See wiring diagrams MHC-0200-0108 for more information.
CONNECTOR P11-P14 FOR VALVE MOUNT ASSEMBLY 1-4
These connectors are used for the connection of valve mount assembly 1-4.
See wiring diagram of the valve mount assembly for more information.
To Next Page
Loading...
