Time/Date Format
2-6 72A-1230 Rev. F
July 22, 2005
• From the Windows “Start” button, choose “Control Panel” from the
“Settings” menu item.
• Double-click on the Mouse Icon, then select the “Motion” tab.
• Click the “Show Pointer Trails box, adjust the scale marker to “Long”
and click OK. This will cause the mouse to leave a trail behind it when
moved, and increase visibility in bright sunlight.
Time/Date Format
You may want to change the time/date format. The default is mm/dd/yyyy for
date, and 12 hour format for time. To change this format, Select “Control
Panel” from the Windows Start button menu. Time and date format can be
changed from the “Date and Time” icon, and this change reflects through to
the M4000.
Introduction to M4000 Software
What’s New
Aside from some behind the scenes changes to make this program a modern
up to date 32 bit program, here are some features visible to the user:
Clipboard 1. The clipboard now has 200 lines instead of 36, so that almost any type of
testing should be able to fit in one single file.
2. The M4000 program now supports English, French, Portuguese, and
Spanish.
3. Serial Number and Manufacturer fields have been added to the nameplate
area.
4. The column widths on the test grid are user-configurable.
5. For each test, time, date, air temperature, and humidity are recorded and
can be viewed.
6. A new file structure has been implemented, allowing user-specified file
names for easier data manipulation.
7. The printout now has a grid around the data, for a more professional look.
8. The Clipboard mode now has graphing capabilities (see ”Graphing Test
Results” on page 3-11).
9. The Clipboard mode now offers automatic temperature correction (see
”Temperature Correction” on page 2-12).
To Next Page
Loading...
Need help?
General
