SECTION 6 Field Replaceable Parts
0855855eng 6/08 6–21
9.5 Final Steps
When paragraphs 8.2 through 8.4 are complete:
1. Reconnect the power cable and power on the Model 5200/5400.
CAUTION: High voltage is present in the print station enclosure.
2. When the printhead is warm, retighten the printhead connection.
3. Purge enough ink from the printhead to cause an ink low
condition in the printhead.
4. Observe the ink delivery path for ink leaks.
5. Power off the Model 5200/5400 if the ink line fittings need
tightening at the ink delivery module.
6. Install the enclosure front cover.
To Next Page
Loading...
Need help?
General