Dräger Infinity C700 - The Timer Function

Alarms
148 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
The Timer function
The Timer function appears similar to the Code
function but serves as a stopwatch only. No other
functions are tied to the Timer button.
When the Timer function is activated, a timer
appears in the header bar with the following two
buttons:
– Stop for stopping the timer. The label of the
button changes to Start.
– Reset button for resetting the timer to zero.
To activate the Timer function
 Press the Timer button on the main menu bar.
 Press the Start button to start the Timer.
To deactivate the Timer function
 Press the Timer button on the main menu bar a
second time. The timer box is removed.
NOTE
Pressing Code while the Timer is active replaces
the Timer with Code. However, the Timer cannot
be activated while Code is active.