Trends/data dialogs
170 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Interacting with the Analysis tool page
Configuring the parameter content
Although the Analysis tool page comes with an
initial default parameter setup, the page can be
customized for the current monitoring session.
The following diagram depicts the setup window for
customizing the parameter content of the Analysis
tool page.
To configure the parameter content
1 Select the Procedures... button from the main
menu bar.
2 Select the Analysis tool tab.
3 Select the trend setup symbol next to a
graphical trend panel.
4 Use the display filter button (A) to toggle
between the filtered or unfiltered display. When
the button is on a light green background
only the buttons of the connected parameters
are displayed. When the symbol appears on a
dark green background the buttons of all
parameters, whether monitored or not, are
displayed.
5 Select the parameters to display in the selected
trend window. Up to three parameters can be
selected for each trend panel.
6 Select the OK button (C) to confirm the
selection. Select the Cancel button (D) to exit
the screen without accepting the changes.
7 Select the Clear all button (E) to deselect any
buttons that are currently selected.
8 Repeat steps 3 to 6 to configure the parameter
setup for other graphical trend panels.
489
NOTE
Buttons with ellipses such as More ventilation...
or More gases... access additional parameters.
To Next Page
Loading...
