System configuration
458 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Configuring the alarm setup
The password-protected Alarms pages are for
configuring the general alarm settings.
To access the alarms pages
1 Select System setup... on the main menu bar.
A password popup appears.
2 Select the Alarms tab.
3 Enter the password and select the Enter button.
4 Select one of the following tabs to access the
respective setup page:
– General settings
– Volume/ Tone
–Code
– M540 settings
Alarms setup – general settings
The following table lists the available settings of the
General settings page.
To Next Page
Loading...
