Dräger Infinity C700 - Accessing the ST Settings; ST Alarm Settings

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 233
ECG, arrhythmia, and ST segment
ST alarm settings
The ST alarms page allows you to configure the
following ST-specific alarm settings:
– Activating or deactivating individual ST alarms
– Setting upper and lower ST alarm limits
– Configuring the alarm archive function
– Auto setting all ST limits
For more detailed information on how to configure
these functions, see "Alarm setup for ST" on
page 135.
To access the ST alarms page
 Select the heart rate parameter field to select
the ECG page directly.
or
1 Select Sensor parameters... from the main
menu bar.
2 Select the ECG tab to access the ECG page.
3 Select the ST alarms tab to display the ST
alarms page.
Accessing the ST settings
 Select the heart rate parameter field to select
the ECG page directly.
or
1 Select Sensor parameters... from the main
menu bar.
2 Select the ECG tab to access the ECG page.
3 Select the ST settings tab.