Dräger Infinity C700 - Large Mean Value; Invasive Blood Pressure Waveforms

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 309
Invasive blood pressure (IBP)
The invasive blood pressure parameter field
contains the following elements:
A IBP parameter label
B Unit of measurement (can be
activated/deactivated)
C Mean pressure value
D Alarm limits or crossed triangle symbols when
alarms are deactivated
E Systolic/diastolic pressure values
Large mean value
The invasive blood pressure mean value can either
be displayed in regular or large font size.
To activate the large mean value display
 Select the invasive blood pressure parameter
field to select the IBP page directly.
or
1 Select Sensor parameters... from the main
menu bar.
2 Select the desired IBP tab (for example, GP1)
along the right side of the IBP page.
3 Select On next to Large mean.
Invasive blood pressure waveforms
Invasive blood pressure waveforms are either
displayed in separate waveform channels or in
overlapped format in one channel. When
overlapped, the waveform field increases to
combine multiple waveforms. For each invasive
blood pressure waveform, a corresponding
parameter field is displayed. To activate the overlap
display for adjacent pressure waveforms, see
page 447 in the "System configuration" chapter.
044
A
B
C
D
E