Operating concept
58 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Secondary display
To extend the display capabilities of a Cockpit,
connect a secondary display to the DVI connector
of the Cockpit using a DVI to DVI to VGA cable
type.
The secondary display duplicates the content of the
Cockpit screen. It does not produce any acoustic
alarm signals and does not support any user
interaction. A secondary display has to meet
certain technical specifications (see page 593):
Export protocol
This function allows sharing data with other Dräger
and third-party devices such as clinical information
and anesthesia record systems and data loggers.
The export protocol connector is located on the
P2500/PS250 (see page 27).
Refer to the section “Connected devices“on page
15 when connecting third-party devices.
Display Resolution
C500 (2
nd
generation) 1440 x 900 pixels
C700 (2
nd
generation) 1680 x 1050 pixels
NOTE
Exporting temperatures is only supported in
Celsius, and exporting blood pressure values is
only supported in mmHg. However, these values
can be converted to the desired unit of
measurement once exported.
NOTE
Export does not indicate parameters that are no
longer on display.
To Next Page
Loading...
