Assembly and preparation
98 Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
To attach the MCable mount adapter
Follow these steps to attach the MCable to the
M540:
1 Make sure the cable end of the MCable (D)
mount adapter (C) points in the same direction
as the connector side of the M540.
2 Align the tabs on the mount adapter (B) with the
indentations on the M540 and push firmly until
the mount adapter clicks in place.
3 Connect the MCable (D) to the blue SpO2 con-
nector on the M540.
To remove the MCable mount adapter
1 Insert a flat head screwdriver (or equivalent
tool) between the indentations for locking the
MCable mount adapter (F).
2 Gently lift to unhinge the adapter.
To Next Page
Loading...
