Duplo DF-850 - 3-8. Performing folding operation

26
Chapter 2 Basic Operation
Copyright © 2018 Duplo Corporation All Rights Reserved
3-8. Performing folding operation
Press the key to start the folding operation.
• Ifinsubtractcountmode,afterthesetnumberofsheetshasbeenprocessed,themachinestops.
Whencontinuingthefoldingoperationinsubtractcountmode,pressthe key. Restart the
process.
• Ifinaddcountmode,pressingandholdingdowntheCkeyreturnsthecountdisplayto[0].Pressing
the key without pressing the C key restarts the process, and the processed sheet number is
incremented.
• Pressthe key to interrupt or stop the operations.
• Pressthe key again to resume the operations.
• Whenthereisnopaperonthepaperfeedtray,themachinewillstopautomatically.
• Ifpaperremainsinsidethemachine,theremainingpaperisejectedbeforetheprocessrestart,but
is not counted in the process sheet number.
• Ifthereisnopaperinthepaperfeedtray,[PaperEmpty]isdisplayedontheLCDdisplay.
About the processing speed
• Whenthepaperbeingprocessedisthinorsmall,orisbeingusedinaquietenvironment,setto[ ].
• Whentheprocessedpaperisthick,setto[ ].However,foldingprecisionmaydeterioratedepending
on the paper used.