39
Chapter3AdvancedOperation
Copyright © 2018 Duplo Corporation All Rights Reserved
4. Cross Folding
Cross single fold
Cross letter fold
Single fold
Cross folding refers to paper where single folding
has been performed, and then single folding is
performed again, or letter folding is performed.
Σ folding
• Theupperlimitofpaperthicknessisne
qualitypaper104.7g/m
2
/27.8lb.
• WhilethepaperΣfolding,orleftand
right direction misalignment, etc., can
become larger depending on the usage
environment and other conditions, this is
not a machine breakdown.
Do not put fingers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
4-1. Cross folding of standard size paper
ThepapersizethatcanbecrossfoldedisA3,B4,A4andB5(EU)/LGR,LGL,LTR,STMTandINV(NA).
In cross folding, paper cannot be stacked lengthwise.
TheoperatingprocedureisdescribedwithB4size
papersubjectedto"crosssinglefolding"asthe
example.
Paper stacking
1
Perform single folding of B4 paper, in accordance with Chapter 2 “3. Standard Folding of
Standard Paper” (p.20).
2
Use fingertips to firmly hold down the
folding line on single-folded paper.
Ifthefoldlineisnotrmlycrushed(folded),
the paper feed may become unstable, and
becomeasourceforΣfolding.