57
Chapter4MaintainingtheMachine
Copyright © 2018 Duplo Corporation All Rights Reserved
Chapter 4 Maintaining the Machine
• Makesurethatyoudisconnectthepowercordfromthewalloutletbeforecleaning.
• Beforeyouusethemachineaftercleaning,makesurethatitssurfaceiscompletelydry.
Do not use flammable sprays and solvents during cleaning, etc. of internal parts
of the machine and in the vicinity of the machine.
Doing so could cause build-up of gas inside the machine, which in turn could cause ignition, resulting
in re and explosion.
When using alcohol, exercise precaution against re and ventilate well, and after use, store in a safe place.
Use of other solvents may damage the rubber rollers and resin inside the machine, resulting in malfunction.
1. Cleaning Each Part
Open or close the top cover
gently.
Hands or ngers may be caught in the
cover section. Doing so may result in
injury.
1-1. Cleaning rubber roll
1
Remove each folding plate.
Use the reverse procedure to Chapter 1
“Attachingthefoldingplate”(p.4)toperform
removal.
2
Open the top cover.
3
While rotating the jam correction knob
to rotate the rubber roller, wipe down
with an alcohol-saturated cloth.
IntheDF-850,thereisnojamcorrectionknob.
Rotate the rubber roller by hand.