Duplo DF-850 - 1-5. Cleaning paper ejection belts

55
Chapter3AdvancedOperation
Copyright © 2018 Duplo Corporation All Rights Reserved
7-7. Read setting for interval function (with power switched on)
When[OperMode]issetto[STD],thisfunctionisforomittingtheoperationspanelsettingeverytimeyou
wanttoperformprocesswiththesameintervalfunction(*)aspreviousone.
(*)[IntervalTime]and[IntervSht]
Whenyouset[DEFINTVL]to[ON],itisunnecessarytosettheoperationpanelbecausethemachinestartsup
with an already set interval function.
Whenyouset[DEFINTVL]to[ON],thealreadysetintervalfunctioniskepteventhough[Interval]issetto[OFF].
P Length 420.0
S-Roller 2
SingleFold
A3 +Count:0000
DEF Speed
DEF INTVL OFF
DEF Speed
DEF INTVL ON
DEF INTVL
< OFF >
DEF INTVL
< ON >
7-8. Paper feed timing setting
Set the paper feed ring operation time.
Whenusingpaperinthelongpaperfeeddirection,orwhenusingthickpaper,artpaper,orcoatedpaper,
the paper feed performance can be boosted by lengthening the paper feed ring operations time.
Whenusingpaperintheshortpaperfeeddirection,donotsetto[Long].
P Length 420.0
S-Roller 2
SingleFold
A3 +Count:0000
Feed Time Mid
Feed INTVL OFF
Feed Time Long
Feed INTVL OFF
Feed Time
< Mid >
Feed Time
< Long >