Duplo DF-850 - 7-7. Read setting for interval function (with power switched on); 7-8. Paper feed timing setting

51
Chapter3AdvancedOperation
Copyright © 2018 Duplo Corporation All Rights Reserved
Example:Setto[SF](Stopperxedmode)
SingleFold
A3 +Count:0000
P Length 420.0
S-Roller 2
Oper Mode STD
Interval OFF
Oper Mode SF
Interval OFF
Oper Mode
< Standard_STD >
Oper Mode
< Stopper fixed >
7-2. Interval functions
Theinterval(batch)functionreferstoafunctionforaxedtimeinterruptionofprocessingoperationsata
speciednumberofsheets.
Duringthisinterruptiontheejectedpaperisremoved,enablingareductioninthepost-processing
operations load.
Ifwantingtosettheintervalfunctionto[ON],change[Interval]to[ON].
If using the interval function, set [Interval] each time you turn on the power.
P Length 420.0
S-Roller 2
Oper Mode STD
Interval OFF
Oper Mode STD
Interval ON
Interval
< OFF >
Interval
< ON >
SingleFold
A3 +Count:0000