Duplo DF-850 - 7-9. Processing speed selection number setting

52
Chapter3AdvancedOperation
Copyright © 2018 Duplo Corporation All Rights Reserved
Example:Settingtointerrupttheprocessfor10seconds,every50sheets
P Length 420.0
S-Roller 2
IntervalTime
< 5 Sec >
IntervalTime
< 10 Sec >
Interv Sht
< 001 Sht >
Interv Sht
< 001 Sht >
Interv Sht
< 051 Sht >
Interv Sht
< 051 Sht >
Interv Sht
< 050 Sht >
IntervalTime 5
Interv Sht 1
IntervalTime 10
Interv Sht 1
IntervalTime 10
Interv Sht 1
IntervalTime 10
Interv Sht 50
SingleFold
A3 +Count:0000
Ifthesheetnumbersetbythesubtractioncounterdiersfromthesheetnumbersetintheinterval,
the sheet number set by the subtraction counter takes priority.
Forexample,iftheintervalissetto20sheetsandthesubtractioncounterto50sheets,the20sheets
willbesetin2setprocessing(totalof40sheetsprocesscompleted),followedbythestartofthethird
set, but the machine stops after 10 sheets process completed because the subtraction counter is
functioning. If the key is pressed after the machine shutdown, the remaining 10 sheets process is
ended, and an interval is entered.