46
Chapter3AdvancedOperation
Copyright © 2018 Duplo Corporation All Rights Reserved
• Ifpapermis-feedstilloccursevenafterthepaperfeedpressureandseparationpressureare
adjusted,setthe[FeedTime]to[Long].
5
After the operations are ended, restore the paper feed pressure and separation
pressure.
If copy paper or fine quality paper is used in the setting of art paper or coated paper, the strong
paper feed pressure could cause two-sheet feeds, while the strong separation pressure could
cause damage to the front edges of the paper.
6
Return the auxiliary paper feed ring to its original position.
7
If the [Feed Time] is changed, return the setting to [Mid].
5-2. Rough paper, recycled paper
Roughpaperandrecycledpaperarethinpaperlackingstiness.Performprocessingwithcautionforthe
following points.
• Beforestackinginthepaperfeedtray,carefullyseparatethepaper.
• Settheprocessingspeedtolow.
If the processing speed is high, it could result in paper wrinkling or abnormal folding.
• Setthepaperfeedpressuretolow.
Ifthepaperfeedpressureishigh,itcouldresultintwo-sheetfeeds.
5-3. B7, A6 size paper (For EU)
TheB7,A6sizepapercanbeprocessedunderthefollowingconditions.
Paperstackingorientation:Verticalstacking
Foldingform:Singlefold
Therearelimitstothefoldingformdependingonpaperqualityandpapersize.
Ifpaperissmallandlight,ahighprocessingspeedcouldresultinchaining(hookedfeeds).Keepthe
processing speed as low as possible.
6. Adjusting Misalignment
Foldingmisalignmentconsistsoftwotypes,"up/downdirectionmisalignment"and"left/rightdirection
misalignment."Moreover,inadditiontothat,factorssuchaspapercharacteristics,etc.,canalsoleadto
"abnormalfolding."
Misalignmentofthefoldingpositioncanoccur,basedontheusageenvironment(temperature,humidity),
paperquality,paperthickness,papergraindirection(vertical,horizontal),cuttingprecision,andprint
condition, etc.