15.4 Adjusting the pattern shift correction
Caution: Danger of injury !
Switch off the main switch.
Check and adjust the pattern shift correction only with the main
switch turned off.
Standard
Between the breast welt positioned exactly as per pattern and the
turned breast welt there will be a design-related pattern shift.
This pattern shift is corrected by the stroke of cylinder 2.
Sew a test seam.
Fit out a breast welt pocket (turn).
Check the matching of pattern.
Correction
Loosen screw 1.
Adjust the cylinder 2 in its holder correspondingly.
Tighten screw 1.
3
137
2
1
To Next Page
Loading...
