Technical data
124 Operating Instructions 967 - 02.0 - 11/2016
Characteristics
Single-needle double lockstitch flatbed sewing machine with
bottom feed, needle feed and alternating foot-top feed and with
automatic lifter and direct drive.
Technical features Eco and Classic:
• The machines are equipped with an extra large, XL, barrel
shuttle hook.
• pneumatic sewing foot lift: The clearance under the sewing
feet when lifted is max. 30mm with needle system 794, with
needle system 7x23, with needle system 1000H, and with
needle system 328 (stitch length max. 12mm)
• DC drive with reversing mechanism in order to position the
needle above the feet.
• Electronic handwheel which can be turned to move the
machine/arm shaft forward or back by drive motor power.
• Initial alignment stitch by pressing the electronic handwheel.
• Automatic wick lubrication with an inspection glass housed in
the arm for lubricating the machine and one inspection glass
in the base plate for lubricating the hook.
• DAC Classic control including DA direct drive with OP1000
control panel built into the machine.
Additional features for Classic model:
• Automatic thread cutter with remaining thread length of
approx. 40mm.
•2
nd
switchable stitch length, 2nd switchable thread tension,
quick stroke adjustment via knee button, automatic bartack.
• Integrated dimmable sewing lamp.
• 6 push buttons with programmable favorite button. An additional
button panel has been placed within easy reach of the sewer and
allows the sewer to assign the same 6 functions of the buttons
housed in the button bar. Possible operating functions are man-
ual bartack, needle up/down, bartack suppression, second stitch
length, and switchable thread tension
To Next Page
Loading...
