Operation
62 Operating Instructions 967 - 02.0 - 11/2016
Button for assigning an optional equipment function (3)
The control of the machine can be used to assign this button an
optional equipment function (e.g. needle cooling).
4.11.3 Transferring a button function to the favorite
button (Classic only)
You can assign one of the button functions to the favorite button.
Select a function that you frequently use so that you can switch it
on faster while sewing.
This function is only available on machines fitted with Classic
equipment.
Fig. 34: Transferring a button function to the favorite button
The button function is assigned by turning the screw under the
button until it is vertical (2). Only one function at a time can be
assigned to the favorite button (1). Therefore, only one of the
screws (3) may be in the vertical position.
All screws must be turned back to their original horizontal position
before a new function is assigned.
(1) - Favorite button
(2) - activated function
(3) - Screws
To Next Page
Loading...
Need help?
General
