Operation
Operating Instructions 967 - 02.0 - 11/2016 53
Temporary conversion to quick stroke adjustment
To temporarily convert to quick stroke adjustment:
1. Set the toggle switch (1) to the lower position.
• To activate elevated sewing foot stroke: Push the knee
button (1) to the right and keep it pressed
The elevated sewing foot stroke is retained as long as the
knee button (1) is pushed to the right.
The elevated sewing foot stroke is switched off as soon as
the knee button (1) is released.
4.10 Stitch length
NOTICE
Property damage may occur!
Machine can be damaged if the adjusting wheels are forced.
The machine is designed so the top adjusting wheel cannot
be set at a lower stitch length than the bottom adjusting
wheel.
Do not attempt to force the top adjusting wheel to set a lower
stitch length.
To Next Page
Loading...
