Operation
68 Operating Instructions 967 - 02.0 - 11/2016
4.16 Sewing
Fig. 38: Sewing
Initial situation
• Pedal position 0:
The machine is at a standstill, the needle is up, and the sew-
ing feet are down.
Positioning the sewing material
To position the sewing material:
1. Press the pedal halfway back in pedal position -1:
The sewing feet are lifted.
2. Push the sewing material into the initial position.
CAUTION
Risk of injury from sharp parts!
Punctures possible.
Take care not to accidentally press the pedal.
Do NOT reach into the needle area.
(1) - Pedal
(2) - Position -2: Cutting and
Bar tacking
(3) - Position -1: Lifting the sewing feet
(4) - Position 0: Rest position
(5) - Position +1: Sewing
To Next Page
Loading...
Need help?
General
