Operation
56 Operating Instructions 967 - 02.0 - 11/2016
4.10.3 Reverse sewing and bar tacking
Bar tacking involves a reversal of the sewing direction.
Bar tacking can be activated in different ways.
The Classic models of the machine are equipped with semi-automatic
and automatic bar tacking.
The Eco models of the machine only allow for manual bar tacking.
The bartack can be sewn both with the machine running and with
the machine at a standstill.
Fig. 31: Reverse sewing and bar tacking
Manual bar tacking
To complete a manual bartack:
1. Push the stitch adjustment lever (4) down.
Reverse sewing will remain active for as long as the stitch
adjustment lever (4) is pushed down.
(1) - Button for bar tacking
(2) - Foot button
(3) - Pedal
(4) - Stitch adjustment lever
(5) - Control panel OP1000
To Next Page
Loading...
Need help?
General
