Maintenance
82 Operating Instructions 967 - 02.0 - 11/2016
To top off the oil:
1. Switch off the machine.
2. Fill oil through the oil filler opening (1) no higher than the max-
imum level marking (2).
3. Switch the machine back on.
6.3 Servicing the pneumatic system
6.3.1 Setting the operating pressure
Proper setting
Refer to the Technical data ( p. 123) chapter for the permissi-
ble operating pressure. The operating pressure cannot deviate by
more than ± 0.5 bar.
Check the operating pressure on a daily basis.
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the
machine.
Ensure that the machine is only used when the operating
pressure is set correctly.
To Next Page
Loading...
