Operation
46 Operating Instructions 967 - 02.0 - 11/2016
4.9.1 Lifting the sewing feet electropneumatically
The machine is equipped with an electropneumatic sewing foot
lift that is controlled using the pedal.
Fig. 24: Lifting the sewing feet electropneumatically
To lift the sewing feet eletropneumatically:
1. Press the pedal to position -1.
The machine stops and lifts the sewing feet.
The sewing feet remain up as long as the pedal is set to
position -1.
OR
1. Press the pedal to position -2.
The machine stops, the thread cutter is activated, and the
sewing feet are raised.
(1) - Pedal
(2) - Position -2: Cutting and
Bar tacking
(3) - Position -1: Lifting the sewing
feet
(4) - Position 0: Rest position
(5) - Position +1: Sewing
To Next Page
Loading...
Need help?
General
