Operation
28 Operating Instructions 967 - 02.0 - 11/2016
14. Feed the needle thread through thread guide (9).
15. Feed the needle thread through the thread lever (8).
16. Feed the needle thread through thread guide (10).
17. Feed the needle thread through the thread clamp (11)
(optional if thread clamp is fitted).
18. Feed the needle thread through thread guides (12) and (13).
19. Feed the needle thread through the thread guide on the needle
bar (14).
20. Feed the needle thread through the needle eye (15) from the
left.
To ensure proper sewing, the needle thread should be at least
70 mm long.
Information
The thread clamp (11) is part of the optional equipment and can
be supplied on request.
To Next Page
Loading...
Need help?
General
