Programming
Operating Instructions 967 - 02.0 - 11/2016 75
Create seam program
For some work processes - such as sewing on labels - you will
find it useful to create seam programs that let you save a sewing
process for repeated use.
It is possible to create seam programs consisting of 4 or 6 seam
sections and up to 25 freely programmable seam sections.
The following parameters can be set for each individual seam
section:
• Soft start
• Thread clamp
• Bar tacking
• Sewing backwards
• Thread cutter
• Automatic sewing foot lift
• Needle position
• Speed reduction
• Number of stitches
• Stitch length (upper and lower adjusting wheel)
Seam program button group
Seam program I • Activates seam program I
Seam program II • Activates seam program II
Seam program III • Sets seam program III
Button Function
To Next Page
Loading...
