B Safety Omega 2
BSafety
Read these operating instructions before using the printer and ensure
that you have understood everything!
If it is determined that damage has been caused by a person's
non-compliance with these operating instructions, Durst Phototechnik
AG is in no way liable. Safe operation of the printer is only ensured
when the following safety precautions and warnings are o bserved
exactly.
1 Intended use
The printer is suitable for printing roll media and plate media within the
specified limit valu es (→ Page 86 / Technical data).
1.1 Impermissible use
The printer may not be used to print the following media:
Animals
Foodstuffs
Media outside the specified limit values
Media with an ignition point of less than 80 °C (
176 °F)
2 Duties of the owner
To ensure the safety of personnel, the owner must take the following safety
measures:
The personnel must posses the app
ropriate qualifications and be
sufficiently trained.
The stipulated protective equipment must be made available to the
personnel (→ Page 89 / Access ories and spare parts).
The warnings on the printer must always be legible and be kept in a
visible and clean condition.
Sufficiently b right il
lumination for the personnel must be ensured.
All regional and national regulations and safety requirements must be
observed.
10 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14
To Next Page
Loading...
