H Service Omega 2
9 Cleaning UV LED
Soiled emission windows reduce the UV output power. In case of high
utilization, the cleaning interval may need to be shorten ed.
Tools/Accessories:
Dry paper towels
Razor blade with holder
3M Scotch Brite abrasive fleece
Scissors
Isopropyl alcohol
Safety gloves with cut p rotection
Contact with ink!
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid a llowing ink to come into contact with skin and eyes.
Energized components, even when the printer has been switched off!
Risk of death via electric shock
Switch off printer with t he main switch.
Preparing for clean in g 1. Switch off printer.
1
2. Open the housing cover (1) at the park position of the print carriage on
the unloading side.
76 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14
To Next Page
Loading...
