B Safety Omega 2
15.3 Careful handling of the encoder ruler
1
Fig. 4 Encoder ruler
Scratching the encoder ruler (1) reduces the functionality of t he printer.
Do not touch the encoder ruler with hard objects.
15.4 Cleaning
The print heads can dry out as a result of improp
er cleaning. This will lead to
decreased printing quality or ev en the failu
re of individual nozzles.
Due to so iling on the nozzle plate , the ink can be smeare d on the printed
medium.
Soiled filters and so iling o n the c onveyor belt can lead to malfunctioning of
the exhaust and ventilation. This can cause the following damage:
Failure of electronic components
Overheating of the UV lamps
Collision of th e print carriage with the medium due to overheating of the
conveyor belt
Soiling on the conveyor belt and on the encoder ruler reduce print quality.
Unsuitable cleaning tools, corrosive cleaning agents and the penetration of
liquids into the printer or workstation can cause damage.
Carry out all specifie
d cleaning work.
Use only the specified cleaning tools.
15.5 Lubrication
Improper lubri
cation of the carriage guide and the use of the lubricating plates
past the speci
fied usage duration shortens the service life of the bearings.
Carry out all specifi ed service w ork.
20 / 9 1 2004 – 2014 © Durst Ph ototechnik AG – www.d urst-online .com , Omega 2, Issued 0 7/20 14
To Next Page
Loading...
